Introduction
Dolphin Emulator is a video game emulator available for multiple operating systems. It allows you to play classic GameCube and Nintendo Wii games on your computer or even your smartphone. It was first released in 2003 as a closed source project, but became open source in 2008. Since then, it has been constantly improved by a team of developers and contributors from all over the world.
dolphin emulator 60fps hack download
Some of the features that make Dolphin Emulator stand out from other emulators are:
High compatibility: Dolphin can run most of the games for GameCube and Wii with few or no issues.
High performance: Dolphin can run games at full speed or even faster than the original consoles, depending on your hardware and settings.
High quality: Dolphin can enhance the graphics of games by increasing the resolution, adding anti-aliasing, anisotropic filtering, shaders, and other effects.
High flexibility: Dolphin can emulate various controllers, such as GameCube pads, Wii Remotes, Nunchuks, Classic Controllers, and even keyboards and mice. You can also customize the controls to your preference.
High functionality: Dolphin can support various features that are not available on the original consoles, such as save states, cheats, screenshots, video recording, netplay, online services, homebrew apps, game mods, and more.
However, before you can enjoy all these benefits of Dolphin Emulator, you need to make sure that your system meets the minimum requirements for running it. Here are the general system requirements for Dolphin Emulator:
Operating SystemCPUGPURAM
Windows 10 or higher (64-bit)Linux (64-bit)macOS 10.15 Catalina or higher (64-bit)Android 5.0 or higher (64-bit)x86-64 or AArch64 processor with SSE2 support4 cores or more recommendedFaster is betterGraphics card that supports Direct3D 11 / OpenGL 4.4 / Vulkan 1.1Modern GPU recommendedOnboard graphics may work but drivers may vary2 GB or more recommended
Note that these are only general guidelines, and some games may have higher or lower requirements than others. For more specific information on hardware compatibility and performance, you can check out the .
How to install and configure Dolphin Emulator
The installation process of Dolphin Emulator is very simple and straightforward. You just need to download the latest version of Dolphin from its , extract it to a folder of your choice, and run the executable file. You don't need to install anything else or modify any system settings.
How to play Super Mario Sunshine at 60 FPS on Dolphin Emulator
Dolphin Emulator 60 FPS patches for GameCube and Wii games
Download Sonic Colors 60 FPS hack for Dolphin Emulator
Best settings for Dolphin Emulator to run games at 60 FPS
Dolphin Emulator 60 FPS cheats for Zelda: Collector's Edition
Super Smash Bros Brawl 120 FPS hack for Dolphin Emulator
Dolphin Emulator 60 FPS hacks and patches forum thread
Metal Gear Solid: Twilight Princess 60 FPS patch for Dolphin Emulator
Luigi's Mansion 60 FPS hack for Dolphin Emulator
Pikmin and Pikmin 2 60 FPS hacks for Dolphin Emulator
Starfox Assault 60 FPS hack for Dolphin Emulator
Mario Kart Wii multiplayer 60 FPS hack for Dolphin Emulator
Sonic Unleashed 60 FPS hack for Dolphin Emulator
Mario Party 8 60 FPS hack for Dolphin Emulator
Final Fantasy Fables: Chocobo's Dungeon 60 FPS hack for Dolphin Emulator
Excitebots: Trick Racing 60 FPS hack for Dolphin Emulator
Cursed Mountain 60 FPS hack for Dolphin Emulator
Tak and Ty series 60 FPS hacks for Dolphin Emulator
Sonic Heroes 60 FPS hack for Dolphin Emulator
How to use vbeam speedhack and audio output to achieve 60 FPS on Dolphin Emulator
How to modify game files to run at higher framerate on Dolphin Emulator
How to enable widescreen hacks and free camera on Dolphin Emulator
How to use level select cheat to access certain stages on Dolphin Emulator
How to fix broken stage portals and other glitches on Dolphin Emulator
How to use game modification codes on Dolphin Emulator
How to create your own 60 FPS hacks and patches for Dolphin Emulator
How to share your 60 FPS hacks and patches with the Dolphin community
How to update your Dolphin Emulator to the latest version with 60 FPS support
How to backup your game saves and settings on Dolphin Emulator
How to troubleshoot common issues with Dolphin Emulator and 60 FPS hacks
How to optimize your PC performance for Dolphin Emulator and 60 FPS gaming
How to connect your controller and other peripherals to Dolphin Emulator
How to stream your Dolphin Emulator gameplay at 60 FPS on Twitch or YouTube
How to record your Dolphin Emulator gameplay at 60 FPS with OBS or Fraps
How to edit your Dolphin Emulator gameplay videos at 60 FPS with Premiere or Vegas
How to compare your Dolphin Emulator gameplay at 60 FPS with the original console versions
How to enjoy the enhanced graphics and sound of your Dolphin Emulator games at 60 FPS
How to play online multiplayer games with your friends on Dolphin Emulator at 60 FPS
How to download and install custom textures and mods for your Dolphin Emulator games at 60 FPS
How to use cheat engine and other tools to modify your Dolphin Emulator games at 60 FPS
The latest version of The latest version of Dolphin Emulator is 5.0-15503 as of June 20, 2023. You can download it for Windows, Linux, macOS, or Android from the . The download size is about 15 MB for Windows and Linux, 20 MB for macOS, and 10 MB for Android. You can also download older versions or development versions from the same page, but they may have more bugs or less features than the latest stable version.
After you download the Dolphin Emulator file, you need to extract it to a folder of your choice. You can use any file archiver program, such as WinRAR, 7-Zip, or PeaZip. You can extract it to any location on your hard drive, such as C:\Dolphin or D:\Games\Dolphin. You can also extract it to a portable device, such as a USB flash drive or an external hard drive. However, you should avoid extracting it to a system folder, such as Program Files or Windows, as this may cause permission issues.
Once you extract the Dolphin Emulator file, you will see a folder named Dolphin-x64 (or Dolphin-x86 if you downloaded the 32-bit version). Inside this folder, you will find several files and subfolders, such as Config, Sys, User, and Dolphin.exe. To run the Dolphin Emulator, you just need to double-click on the Dolphin.exe file. This will launch the Dolphin main window, where you can access all the settings and features of the emulator.
The first time you run the Dolphin Emulator, you may see a pop-up window asking you to allow Dolphin to collect anonymous usage statistics. This is optional and does not affect your privacy or security. You can choose to allow or deny this request. You can also change this option later in the Configuration menu.
The next thing you need to do is to configure the Dolphin Emulator settings for optimal performance and compatibility. There are many settings that you can tweak and customize in Dolphin, but here are some of the most important ones:
General Settings
To access the general settings of Dolphin Emulator, you need to click on the Config button on the main toolbar. This will open a new window with several tabs, such as General, Interface, Audio, GameCube, Wii, Paths, and Advanced.
On the General tab, you can change some basic settings of Dolphin Emulator, such as:
Enable Dual Core: This option allows Dolphin to use two CPU cores for emulation. This can improve performance and speed up games, but it may also cause some instability or compatibility issues with some games. It is recommended to leave this option enabled unless you encounter problems.
Enable Cheats: This option allows Dolphin to use cheat codes for games. You can find cheat codes for various games on the . To use cheat codes, you need to enable this option and then select the cheats you want from the Properties menu of each game.
Show FPS: This option allows Dolphin to display the current frames per second (FPS) of the game on the top left corner of the screen. FPS is a measure of how smoothly the game is running. The higher the FPS, the better. However, some games may have a fixed FPS limit that cannot be exceeded by Dolphin. For example, most GameCube and Wii games run at 60 FPS or 30 FPS.
Limit by FPS: This option allows Dolphin to limit the emulation speed by the FPS of the game. This can prevent Dolphin from running too fast or too slow compared to the original console. It is recommended to leave this option enabled unless you want to speed up or slow down the game deliberately.
Backend: This option allows you to choose which graphics backend to use for rendering games on Dolphin Emulator. There are four options available: Direct3D 11 (Windows only), OpenGL (cross-platform), Vulkan (cross-platform), and Software Renderer (cross-platform). Each backend has its own advantages and disadvantages in terms of performance, compatibility, and features. According to some online sources , here is a brief comparison of the different backends: - Direct3D 11: Generally runs well on Windows devices with NVIDIA, AMD, or Intel graphics chips. It has good compatibility and stability, but it may lack some advanced features or optimizations that other backends have. - Direct3D 12: Generally runs faster than Direct3D 11 on Windows devices with NVIDIA or AMD graphics chips, especially on newer hardware. It has more features and optimizations, but it may also have more bugs or compatibility issues with some games. - OpenGL: Generally runs slower than Direct3D or Vulkan on Windows devices, but it may run better on Linux or macOS devices. It has good compatibility and stability, but it may lack some features or optimizations that other backends have. - Vulkan: Generally runs faster than OpenGL on Windows, Linux, or Android devices with NVIDIA or AMD graphics chips, especially on newer hardware. It has more features and optimizations, but it may also have more bugs or compatibility issues with some games. It is not recommended for Intel or Adreno (Snapdragon) graphics chips, as they may have poor driver support for Vulkan. The best way to find out which backend works best for you is to try them out yourself and see how they perform on your system and with your games. You can also check the to see if there are any known issues or recommendations for specific games. You can change the backend at any time from the Graphics settings menu.
Graphics Settings
To access the graphics settings of Dolphin Emulator, you need to click on the Graphics button on the main toolbar. This will open a new window with several tabs, such as General, Enhancements, Hacks, and Advanced.
On the General tab, you can change some basic graphics settings of Dolphin Emulator, such as:
Internal Resolution: This option allows you to increase or decrease the resolution of the game's 3D graphics. The higher the resolution, the sharper and clearer the graphics will look, but the more demanding it will be on your system. You can choose from several presets, such as Auto (Window Size), Native (640x528), 2x Native (1280x1056), 3x Native (1920x1584), 4x Native (2560x2112), 5x Native (3200x2640), 6x Native (3840x3168), 7x Native (4480x3696), 8x Native (5120x4224), or Custom. You can also use fractional values, such as 1.5x Native (960x792). The recommended resolution for most games is 2x Native or higher, depending on your system and monitor.
Anti-Aliasing: This option allows you to reduce or eliminate the jagged edges of the game's 3D graphics. The higher the anti-aliasing level, the smoother and more realistic the graphics will look, but the more demanding it will be on your system. You can choose from several modes, such as None, FXAA (Fast Approximate Anti-Aliasing), SSAA (Super Sampling Anti-Aliasing), MSAA (Multi-Sampling Anti-Aliasing), or CSAA (Coverage Sampling Anti-Aliasing). The recommended mode for most games is FXAA or SSAA, depending on your system and preference.
Anisotropic Filtering: This option allows you to improve the quality of the game's textures when viewed at oblique angles. The higher the anisotropic filtering level, the sharper and more detailed the textures will look, but the more demanding it will be on your system. You can choose from several levels, such as Off, 1x, 2x, 4x, 8x, or 16x. The recommended level for most games is 16x.
Post-Processing Effect: This option allows you to apply various effects to enhance the appearance of the game's graphics. You can choose from several presets, such as None, FXAA Bloom (adds a soft glow effect), SMAA Bloom (adds a sharper glow effect), Cel Shading (makes the graphics look like a cartoon), Grayscale (makes the graphics look black and white), Inverted Colors (makes the graphics look like a negative image), Pixelated (makes the graphics look like an old arcade game), Scanlines (makes the graphics look like an old CRT TV), Sepia Tone (makes the graphics look like an old photograph), Stereoscopic 3D (makes the graphics look 3D with special glasses), or Custom. You can also create your own post-processing effects using the . The recommended effect for most games is None or FXAA Bloom, depending on your preference.
On the Enhancements tab, you can change some advanced graphics settings of Dolphin Emulator, such as:
Scaled EFB Copy: This option allows Dolphin to scale the resolution of the game's framebuffer (EFB) to match the internal resolution. This can improve the quality of some effects, such as water, reflections, shadows, and heat waves. However, it may also cause some glitches or slowdowns with some games. It is recommended to leave this option enabled unless you encounter problems.
Force Texture Filtering: This option allows Dolphin to force the game's textures to use linear filtering instead of point filtering. This can make the textures look smoother and less pixelated, but it may also cause some graphical errors or artifacts with some games. It is recommended to leave this option disabled unless you prefer the smoother look.
Disable Fog: This option allows Dolphin to disable the game's fog effects. This can make the graphics look clearer and brighter, but it may also break some atmospheric effects or game mechanics that rely on fog. It is recommended to leave this option disabled unless you don't like fog.
Widescreen Hack: This option allows Dolphin to stretch the game's aspect ratio from 4:3 to 16:9. This can make the graphics look more modern and fit better on widescreen monitors, but it may also cause some graphical errors or distortions with some games. It is recommended to leave this option disabled unless you want to play in widescreen mode.
Force 24-bit Color: This option allows Dolphin to force the game's color depth to 24-bit instead of 16-bit. This can make the graphics look more vibrant and colorful, but it may also cause some performance issues or compatibility problems with some games. It is recommended to leave this option disabled unless you have a powerful system and want to improve the color quality.
On the Hacks tab, you can change some experimental graphics settings of Dolphin Emulator, such as:
Skip EFB Access from CPU: This option allows Dolphin to skip reading or writing data from the game's framebuffer (EFB) by the CPU. This can improve performance and speed up games, but it may also break some effects or features that rely on EFB access, such as heat vision, motion blur, collision detection, and more. It is recommended to leave this option disabled unless you know what you are doing.
Ignore Format Changes: This option allows Dolphin to ignore changes in the format of the game's framebuffer (EFB). This can improve performance and speed up games, but it may also cause some graphical errors or glitches with some games. It is recommended to leave this option disabled unless you know what you are doing.
Store EFB Copies to Texture Only: This option allows Dolphin to store copies of the game's framebuffer (EFB) as textures instead of RAM. This can improve performance and speed up games, but it may also break some effects or features that rely on EFB copies, such as bloom, depth of field, lens flare, and more. It is recommended to leave this option enabled unless you encounter problems.
Texture Cache Accuracy: This option allows you to adjust the accuracy of Dolphin's texture cache. The higher the accuracy, the less likely it is that Dolphin will reuse incorrect textures, but the more demanding it will be on your system. You can choose from three levels: Fast (low accuracy), Medium (default accuracy), or Safe (high accuracy). The recommended level for most games is Medium.
GPU Texture Decoding: This option allows Dolphin to use your GPU instead of your CPU for decoding textures. This can improve performance and speed up games, but it may also cause some compatibility issues or graphical errors with some games. It is recommended to leave this option disabled unless you have a powerful GPU and want to reduce CPU load.
On the Advanced tab, you can change some expert graphics settings of Dolphin Emulator, such as:
Crop: This option allows Dolphin to crop the game's output to remove black borders or overscan areas. This can make the graphics look more clean and crisp, but it may also cut off some important information or elements from the screen. It is recommended to leave this option disabled unless you want to crop the output.
Borderless Fullscreen: This option allows Dolphin to run in borderless fullscreen mode instead of exclusive fullscreen mode. This can make switching between Dolphin and other applications easier and faster, but it may also cause some performance issues or input lag with some games. It is recommended to leave this option disabled unless you prefer borderless fullscreen mode.
Backend Multithreading: This option allows Dolphin to use multiple threads for graphics rendering. This can improve performance and speed up games, but it may also cause some instability or compatibility issues with some games. It is recommended to leave this option enabled unless you encounter problems.
Shader Compilation Mode: This option allows you to choose how Dolphin handles shader compilation. Shaders are small programs that run on your GPU and control how the game's graphics are rendered. Dolphin needs to compile shaders before they can be used, which can cause stuttering or freezing during gameplay. You can choose from three modes: Synchronous (compile shaders on demand, causes stuttering), Asynchronous (compile shaders in the background, reduces stuttering but may cause graphical errors), or Ubershaders (use a generic shader that covers all cases, eliminates stuttering but requires a powerful GPU). The recommended mode for most games is Asynchronous.
Precompile Shaders: This option allows Dolphin to precompile shaders before launching a game. This can reduce or eliminate stuttering during gameplay, but it may also increase loading times and memory usage. It is recommended to leave this option disabled unless you have a powerful system and want to avoid stuttering.
These are some of the most important graphics settings of Dolphin Emulator, but there are many more that you can explore and experiment with. For more information on graphics settings, you can check out the .
How to load and play games on Dolphin Emulator
Now that you have installed and configured Dolphin Emulator, you are ready to load and play games on it. But first, you need to get some games for Dolphin Emulator. There are two main ways to get games for Dolphin Emulator: ripping them from your original discs or downloading them from online sources.
Ripping games from your original discs
If you own the original GameCube or Wii discs of the games you want to play on Dolphin Emulator, you can rip them to your computer using a disc drive and a software program. Ripping games from your original discs is legal and ethical, as long as you don't share or distribute them online. However, ripping games from your original discs can be time-consuming and complicated, depending on your hardware and software setup.
The process of ripping games from your original discs varies depending on the type of disc (GameCube or Wii), the type of drive (DVD-ROM or Wii), and the type of software (Rawdump, Friidump, CleanRip, or others). For a detailed guide on how to rip games from your original discs, you can check out the .
Downloading games from online sources
If you don't own the original GameCube or Wii discs of the games you want to play on Dolphin Emulator, you can download them from online sources. However, downloading games from online sources is illegal and unethical, as it violates the copyright laws and the terms of service of the game developers and publishers. Downloading games from online sources can also expose your computer to viruses, malware, or other threats.
The process of downloading games from online sources varies depending on the source (torrents, direct downloads, ROM sites, or others). For obvious reasons, we cannot provide any links or instructions on how to download games from online sources. You are solely responsible for finding and downloading games from online sources at your own risk.
Loading games from different formats and adding them to Dolphin's game list
Once you have some games for Dolphin Emulator, either by ripping them from your original discs or downloading them from online sources, you need to load them into Dolphin Emulator. Dolphin Emulator supports various formats for GameCube and Wii games, such as ISO, GCM, WBFS, CISO, GCZ, WAD, DOL, ELF, DFF, and others. However, some formats may have advantages or disadvantages over others in terms of size, compression, compatibility, and features. For more information on the different formats and how to convert them, you can check out the .
To load a game into Dolphin Emulator, you just need to click on the Open button on the main toolbar and browse to the folder where you stored your game files. You can also drag and drop your game files into the Dolphin main window. Dolphin will automatically detect the format and type of the game and load it accordingly.
To add a game to Dolphin's game list, you just need to click on the Refresh button on the main toolbar and wait for Dolphin to scan your game folders. You can also add or remove game folders manually by clicking on the Paths button on the Config menu and editing the list of ISO Directories. Dolphin will display your games in a grid or list view, with their titles, covers, regions, ratings, and file sizes. You can also sort, filter, or search your games by various criteria.
Using save states and game upgrades for enhanced gameplay
One of the advantages of Dolphin Emulator is that it allows you to use save states and game upgrades for enhanced gameplay. Save states are snapshots of the game's memory that you can save and load at any point during gameplay. Game upgrades are patches or mods that improve or modify the game's graphics, sound, gameplay, or content.
To use save states, you just need to click on the Save State or Load State buttons on the main toolbar. You can also use keyboard shortcuts (F1-F8 for saving, Shift+F1-F8 for loading) or hotkeys (Ctrl+S for saving, Ctrl+L for loading). You can have up to 8 save states per game, and you can also export or import them as files. Save states are useful for saving your progress in games that don't have a native save feature, or for skipping cutscenes or difficult sections in games.
To use game upgrades, you just need to download them from online sources and place them in the appropriate folders in Dolphin's User directory. For example, to use HD texture packs, you need to place them in User\Load\Textures\GAMEID, where GAMEID is the unique identifier of the game (such as GALE01 for Super Smash Bros. Melee). To use custom soundtracks, you need to place them in User\Load\GMX\GAMEID. To use cheats or hacks, you need to place them in User\GameSettings\GAMEID.ini. For more information on how to use game upgrades, you can check out the .
How to use advanced features of Dolphin Emulator
Besides playing games on Dolphin Emulator, you can also use some advanced features that are not available on the original consoles, such as Netplay, Wii Network, Virtual SD Card and NAND, and FIFO Player. These features can enhance your gaming experience by allowing you to play online with other players, access online services and custom servers, run homebrew apps and game mods, and record and debug graphics issues.
How to use Netplay for online multiplayer gaming
Netplay is a feature that allows you to play games online with other players using Dolphin Emulator. Netplay works by synchronizing the inputs of all players over a network connection, creating a multiplayer session that mimics a local multiplayer session. Netplay supports both GameCube and Wii games that have native multiplayer modes.
To use Netplay, you need to have a stable internet connection and a compatible version of Dolphin Emulator. You also need to have the same game file and settings as the other players. You can either host or join a Netplay session using the Netplay button on the main toolbar. You can also use third-party services or programs, such as , to find or create Netplay sessions.
For a detailed guide on how to use Netplay, you can check out the .
How to use Wii Network for accessing online services and custom servers
Wii Network is a feature that allows you to access online services and custom servers using Dolphin Emulator. Wii Network works by emulating the Wii's network functions and protocols, creating a virtual connection that mimics a real connection. Wii Network supports both official Nintendo services (such as Wii Shop Channel) and unofficial services (such as Wiimmfi).
To use Wii Network, you need to have a stable internet connection and a compatible version of Dolphin Emulator. You also need to have a valid NAND dump from your real Wii console or from an online source and a valid Wii Network certificate from your real Wii console or from an online source. You can obtain these files by following the instructions on the .
Once you have these files, you need to place them in the appropriate folders in Dolphin's User directory. For example, to use the Wii Shop Channel, you need to place the NAND dump in User\Wii and the certificate in User\Wii\ClientCerts. To use Wiimmfi, you need to place the NAND dump in User\Wii and the certificate in User\Wii\ClientCerts\Wiimmfi.de.
After you place these files, you need to configure the Wii Network settings in Dolphin Emulator. You can do this by clicking on the Config button on the main toolbar and then clicking on the Wii tab. Here, you can change some settings, such as:
Enable WiiConnect24: This option allows Dolphin to emulate the Wii's standby mode, which enables some online features and services, such as Wii Mail, Wii Message Board, and Wii Shop Channel. It is recommended to leave this option enabled unless you encounter problems.
Use PAL60 Mode: This option allows Dolphin to use 60Hz mode for PAL games that support it. This can improve the performance and compatibility of some games, but it may also cause some graphical errors or glitches with some games. It is recommended to leave this option disabled unless you know what you are doing.
Aspect Ratio: This option allows you to choose the aspect ratio of the game's output. You can choose from three options: 4:3 (default), 16:9 (widescreen), or Auto (based on game's settings). It is recommended to choose the option that matches your monitor's aspect ratio.
System Language: This option allows you to choose the system language of the Wii console. You can choose from several languages, such as English, French, German, Spanish, Italian, Dutch, Portuguese, or Japanese. It is recommended to choose the language that matches your game's region.
Country: This option allows you to choose the country of the Wii console. You can choose from several countries, such as USA, Canada, UK, France, Germany, Spain, Italy, Netherlands, Australia, Japan, or Korea. It is recommended to choose the country that matches your game's region.
Once you configure these settings, you can access the Wii Network features by clicking on the Tools button on the main toolbar and then clicking on one of the options, such as Start Wii Menu, Install WAD, Import BootMii NAND Backup, or Perform Online System Update. You can also access some of these features by launching a game that supports them.
For a detailed guide on how to use Wii Network, you can check out the .
How to use Virtual SD Card and NAND for homebrew apps and game mods
Virtual SD Card and NAND are features that allow you to use homebrew apps and game mods on Dolphin Emulator. Homebrew apps are unofficial applications that are not authorized by Nintendo or the game developers. Game mods are modifications or enhancements of existing games that change their graphics, sound, gameplay, or content.
To use Virtual SD Card and NAND, you need to have a valid SD card image file and a valid NAND dump file from your real Wii console or from an online source. You can obtain these files by following the instructions on the .
Once you have these files, you need to place them in the appropriate folders in Dolphin's User directory. For example, to use a Virtual SD Card for homebrew apps or game mods, you need to place the SD card image file in User\Wii\sd.raw. To use a NAND dump for homebrew apps or game mods, you need to place the NAND dump file in User\Wii\nand.bin.
After you place these files, you can use the Virtual SD Card and NAND features by clicking on the Tools button on the main toolbar and then clicking on one of the options, such as Open Wii Save Folder, Extract Certificates from NAND, or Import BootMii NAND Backup. You can also use some of these features by launching a game that supports them.
For a detailed guide on how to use Virtual SD Card and NAND, you can check out the .
How to use FIFO Player for recording and debugging graphics issues
FIFO Player is a feature that allows you to record and replay graphics commands on Dolphin Emulator. Graphics commands are instructions that tell your GPU how to render the game's graphics. FIFO Player can help you capture, analyze, and debug graphics issues that occur during gameplay.
To use FIFO Player, you need to have a compatible version of Dolphin Emulator and a game that has graphics issues. You also need to enable the Dump Textures and Dump EFB Target options in the Graphics settings menu.
To record graphics commands, you need to click on the Tools button on the main toolbar and then click on Start Recording. This will start recording the graphics commands that are sent to your GPU. You can stop recording by clicking on Stop Recording or by closing Dolphin Emulator.
To replay graphics commands, you need to click on the Tools button on the main toolbar and then click on FIFO Player. This will open a new window where you can load and play the recorded graphics commands. You can also adjust some settings, such as Frame Range, Loop Mode, Frame Step, and Speed.
For a detailed guide on how to use FIFO Player, you can check out the .
Conclusion
In this article, we have covered some of the basics of Dolphin Emulator, such as how to install and configure it, how to load and play games on it, and how to use some of its advanced features. Dolphin Emulator is a powerful and versatile software that can enhance your gaming experience by allowing you to play classic GameCube and Wii games on your PC or mobile device. However, Dolphin Emulator is also a complex and evolving software that may have some limitations or challenges depending on your system and games.
If you want to learn more about Dolphin Emulator, you can check out some of these resources:
: The official website of Dolphin Emulator, where you can download the latest version, read the latest news, browse the documentation, join the community, and more.
: The official wiki of Dolphin Emulator, where you can find information on games, settings, guides, FAQs, troubleshooting, development, and more.
: The official forums of Dolphin Emulator, where you can ask questions, share experiences, report issues, request features, provide feedback, and more.
: The official blog of Dolphin Emulator, where you can read articles on various topics related to Dolphin Emulator, such as progress reports, feature showcases, technical details, and more.
: The official YouTube channel of Dolphin Emulator, where you can watch videos on various topics related to Dolphin Emulator, such as game showcases, feature demonstrations, tutorials, and more.
We hope you enjoyed this article and learned something new about Dolphin Emulator. If you have any questions, comments, or suggestions, feel free to leave them below. Thank you for reading and happy gaming!
FAQs
Here are some of the frequently asked questions (FAQs) about Dolphin Emulator:
Is Dolphin Emulator legal?
Dolphin Emulator is legal as long as you use it for your own personal and non-commercial purposes. However, downloading or distributing games that you do not own is illegal and unethical. You should only use games that you have legally obtained from your original discs or online sources.
Is Dolphin Emulator safe?
Dolphin Emulator is safe as long as you download it from its official website or other trusted sources. However, downloading games from unverified sources may expose your computer to viruses, malware, or other threats. You should always scan your files with a reliable antivirus program before using them.
Is Dolphin Emulator free?
Dolphin Emulator is free and open source software. You can download and use it without paying any fees or charges. You can also modify and distribute it under the terms of the GNU General Public License version 2.
How do I update Dolphin Emulator?
You can update Dolphin Emulator by downloading the latest version from its official website or by using the built-in updater feature. To use the updater feature, you need to click on the Help button on the main toolbar and then click on Check for Updates. This will check if there is a newer version available and prompt you to download and install it.
How do I uninstall Dolphin Emulator?
You can uninstall Dolphin Emulator by deleting the folder where you extracted it. You don't need to uninstall anything else or modify any system settings. However, if you want to remove all traces of Dolphin Emulator from your computer, you may also want to delete the User folder in your Documents directory, which contains your configuration files, save files, game files, and other data. 44f88ac181
Comments